Easily Modifying Raw Files - Pentax K110D Operating Manual

Item
Image Size
3
Click [OK].
The image is cropped.
The cropping area remains on the image in the preview panel, and the
icon is selected. After the image is processed, the cropping area is
saved with the specified pixels.
To cancel cropping, click the

Easily Modifying RAW Files

In Custom Processing mode, simple image processing suited to your
shooting intent is possible with selection of an Image tone with PENTAX
PHOTO Laboratory 3.
Select from the following two Image tones when using J,
L, U, F, q, r:
Natural
Bright
When in Full Auto Processing mode, RAW files are processed using the Image
tone selected at the time of shooting. This setting cannot be changed in
PENTAX PHOTO Laboratory 3.
Description
Do not resize:
Select this to not change the image output size.
Specify image size:
Select this to specify the number of pixels (by width
and height) for the image output size. Enter the
number of horizontal and vertical pixels in [W] and
[H] for [Specify image size] on the right side.
Specify resolution:
Select this to specify the resolution (in dpi) for the
image output size. Enter the resolution (dpi) and
horizontal and vertical size (in mm or inches) in
[Specify resolution] on the right side of [Specify
image size]. When [Specify paper size] is specified
in [Cropping Aspect Ratio] for [Crop/Resize], select
the paper size specified as the output size.
Elaborates images with natural colors.
Elaborates sharp, bright images.
icon again to undo the cropping area.
83