Pentax K110D Operating Manual page 101

Item
Status at Startup
Show Splash Screen
at Startup
Arrange Panels
Initialize Parameters
when Creating a New
File
Display Alerts
Description
Select the status at startup.
Status at last exit:
Maintains the settings last used when the
application was closed. This switches to
[Arrange All] when, for example, the settings
last used cannot be restored due to a difference
in the number or type of monitors.
Arrange All:
All panels to be used are arranged. Display size
is set to Small (default setting), and other
settings are displayed with the status at last exit.
Default : The status for each panel is returned to the
default status.
Sets splash screen when PENTAX PHOTO Laboratory 3
starts.
On : Splash screen is shown.
Off : Splash screen is not shown.
Specify the positioning of panels with automatic
arrangement.
Align right:
Panels are aligned along the right side.
Align left:Panels are aligned along the left side.
Put in Secondary Monitor Except Preview:
The White Balance panel, Tone panel, Other
Settings panel, Lens aberration correction
panel, and Noise Reduction panel are aligned
in a secondary monitor while only the Preview
panel is displayed in the primary monitor.
In PENTAX PHOTO Laboratory 3, sets whether to
initialize all Custom Processing parameters when
opening a new image file.
Yes : Resets parameters.
No : Does not reset parameters.
Sets whether to display alerts.
Yes : Displays alerts. (The "In the future, do not show
this message" check box is not checked for all
alerts.) To change the display setting for
individual alerts, set this to [Yes] and then
check the "In the future, do not show this
message" check box for the alerts you do not
want to show.
No : Does not display alerts. (The "In the future, do
not show this message" check box is checked
for all alerts.)
99