Table of Contents
Advertisement
Viewing the Contents of a
Memory Card (Windows
1
Install [USB Mass Storage Class
driver]. (Windows
(
pg. 5)
2
Make sure that there is a
memory card in the camcorder.
3
Set the camcorder's VIDEO/
MEMORY Switch to "MEMORY".
4
Set the camcorder's Power
Switch to "PLAY" while
pressing down the Lock Button
located on the switch.
The camcorder turns on.
5
Connect the camcorder to the
PC with a USB cable. (
On the camcorder's LCD monitor
[USB] appears.
6
When using Windows
The [Removable
Disk] window
appears on the
PC's screen
after a moment.
Select [Open
folders to view
files using
Windows
Explorer] and
click [OK].
NOTE:
If the [Removable Disk] window does
not appear, confirm the connection
pg. 8) or perform the steps 1 and
(
2 in the right.
®
)
®
98SE only)
pg. 8)
®
XP:
— 9 —
When using Windows
2000:
1 Double-click the [My Computer] icon
on the desktop. The [Removable
Disk] icon which represents the
memory card in the camcorder
appears in the [My Computer]
window.
2 Double-click the [Removable Disk]
icon.
®
● Windows
icon does not appear if USB Mass
Storage Class driver is not installed
properly. In this case, refer to
"Updating [Device Manager]
®
(Windows
7
The folders in the memory card
appear.
Still images
Different file types are stored in
different folders.
[DCIM]: Contains folders with still
images (extension ".jpg")
[DCVI]: Contains folders with video
clips (extension ".asf")
● The [DCVI] folder is displayed only
when the camcorder is equipped
with E-Mail Clip Recording function.
[MISC]: Contains folders with DPOF
setting data
CONTINUED ON NEXT PAGE
®
98SE/Me/
98SE: [Removable Disk]
98SE only)" (
pg. 7).
Video clips
Navigation
data
DPOF
setting
data
Advertisement
Table of Contents
