ELNA eXcellence 580+ Instruction Manual page 27

z x
r
(t2)
(t1)
e
w
c
v
b
n
m
Key position calibration
If the function keys seem out of alignment, calibrate the
key position as follows.
z Enter the machine setting mode. Press the mode key
4 times to enter the key position calibration.
q
x Press the start/stop button q.
(t4)
y
(t3)
t
c The key position adjustment screen appears and
"t1" is shown on the right side of the screen. With the
touch panel stylus w, press e on the touch panel of
your machine.
v "t2" will be shown on the LCD screen. Press r on the
touch panel.
b "t3" will be shown on the LCD screen. Press t on the
touch panel.
n "t4" will be shown on the LCD screen. Press y on the
touch panel.
m The screen will be back to the key position adjustment
screen.
Press the memory key to apply the setting.
25