Eyelet; Machine Settings Q Pattern: Mode 1; Note; Starting Point - ELNA eXcellence 710 Instruction Manual

q
e
L1
q
w
r
q
L3
w

Eyelet

Machine settings

q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
The eyelet is used for belt holes etc.
Sewing
Sew until the machine stops automatically.
Open the eyelet with an eyelet puncher or pointed
scissors.
q Starting point
Adjusting the shape of an eyelet
Correct the shape of the eyelet as follows:
If the eyelet gap opens, press " – " on the stitch length
adjusting key.
If the eyelet overlaps, press " + " on the stitch length
adjusting key.
q Eyelet gap opens
w Eyelet overlaps

NOTE:

The shape can be adjusted within L1 to L3 (default
setting is L2).
59
MODE 1: 36
AUTO
Satin stitch foot F
5