BenQ AQ COLOR PD Series User Manual page 30

Activating the Auto Switch function of KVM Switch
After the second source has been set properly from
>
KVM Switch
computer with keyboard and mouse control is powered off or any of the cable is disconnected,
the input source and the USB control will be switched to the other computer automatically.
The KVM Auto Switch might not switch video and USB signals simultaneously if
>
Switch Video Input
Scenario A-1
(If USB-C™ is disconnected)
Scenario A-2
(If USB Upstream is disconnected)
Scenario B-1
(If USB-C™ is disconnected)
Scenario B-2
(If USB Upstream is
disconnected)
30 How to adjust your monitor
and turn on the Auto Switch function. Once enabled, if the
Auto Switch
. In this case, select a video input manually from
PC 1
PC 1
PC 1
PC 1
KVM Switch
>
Input
PC 2
PC 1
> , you can go to
Video Input
is selected from
None
.
Signal Input
PC 2
PC 2
KVM
PC 2
PC 2