Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-XE34 Owner's Manual

Direct Operation
Choose Video or S-video by pressing the VIDEO or the S-
VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point

Use the Point
▲▼
press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
Use the Point buttons to select Computer 1. And then
▲▼
press the Point button to access the submenu items. Use
►
the Point buttons to select the S-video and then press
▲▼
the SELECT button.
When the input source is coming from video
S-video
equipment connected to the COMPUTER IN
1/S-VIDEO IN/COMPONENT IN terminal with a
S-video-VGA cable, select S-VIDEO.
✔Note:
When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.44).
36

Video Input

Input Source Selection (Video, S-video)

buttons to select Input and
▲▼
the SELECT button.
► or
buttons to select Video and then
Remote Control
VIDEO button
S-VIDEO button
Input Menu
Computer
1
Video
S-video
Auto
Auto