Capture Mode; Burst - Sanyo Xacti VPC-603 Owner's Manual

CAPTURE MODE

Burst

This mode is used for continuous shooting. 3 pictures are taken continuously once the shutter release button
is pressed. Secure the camera to a tripod or place it on a stable surface.
1. Rotate the mode dial to
2. Press the power switch to turn on the power.
3. Press the four-way controller ( /
[Burst]. You can also change the setting using four-way controller
( ).
4. Press the
displayed on the monitor screen.
5. Press the shutter release button halfway to lock the focus.
6. Press the shutter release button to capture a sequence of images.
In Burst mode, the flash mode will be set to Flash Off automatically.
EN-30
, , ,
button to confirm the setting. The
, , or .
) and use ( ) to select
indicator is
Capture Mode Captu pture Mod e Mode
Burst Burst Bu
OK : OK : OK :