Description Of Each Menu - ViewSonic PJD2121 User Manual

Description of each menu

Feature
Blank Screen
Keystone
Aspect Ratio
Magnify
Mode
Brightness
Contrast
Sharpness
Color Space
Noise
Reduction
Lamp Reset
Factory Reset
HSG
Active Source
Resolution
Lamp Hours
The following setup value will be changed after calibration.
Phase
Tracking
Horizontal
Position
Vertical
Position
ViewSonic
Description
Allows you to select which logo screen will display during
projector start-up.
Vertical Keystone function by using DDP2230 of "TI"
chip to provide vertical keystone correction
Aspect Ratio allows the user to set the aspect ratio of the
image displayed on the projector. This is helpful when the
input resolution is not at the native resolution of the
content or if the user wishes to fill the projector.
1. Fill
2. Native
3. 4:3
4. 16:9
To zoom in the details one the projected screen.
User can choose different mode. Such as User, VGA,
Video and ViewMatch.
When Picture mode is selected on User mode, this
function can be active.
Adjusts the brightness of the image. The higher the setting
the brighter the image. And the lower the setting, the
darker the image.
When Picture mode is selected on User mode, this
function can be active.
Adjusts the degree of difference between the dark and
light in the image. The higher the value, the greater the
contrast.
When Picture mode is selected on User mode, this
function can be active.
Adjusts the image to make it look sharper. (At higher
values, will switch to Detail Enhancement)
User can set different Color Space such as Auto, RGB,
YCbCr and YPbPr.
Reduce signal noise. But depends on the input signal.
To reset the lamp hours after replaced the lamp.
Return to the factory pre-set value.
Refer to Page 16, "Fine-tuning the image quality in user
modes"
Shows the input source.
1. VGA
2. Component
Shows the current input resolution.
Shows the current lamp using hours.
Adjusts the clock phase to reduce image distortion.
Adjusts the image size to fit the screen
Adjusts the horizontal width of the image.
Vertical
Adjusts the width of the image.
min
N/A
-30
N/A
0
N/A
-100
-50
0
N/A
ON
NA
NA
NA
NA
NA
NA
17
Max Default
N/A ViewSonic
+30 0°
N/A Fill
100 0
PC: VGA
N/A
Component:
Video
100 0
50 0
31 16
N/A Automatic
ON
OFF
NA NA
NA NA
NA NA
NA NA
NA NA
NA NA
PJD2121