Switching Input Signal; Adjusting The Projected Image; Adjusting The Projection Angle - ViewSonic PJD2121 User Manual

To use the OSD menus, please set them to your familiar language first.
1. Press MENU on the remote control to turn on the OSD.
Press Enter to select.
2. Use
select.

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a
time.
Be sure the Auto Source Select function in the Advance menu is On (which is the default of this projector) if you want
the projector to automatically search for the signals.
You can also manually cycle through the available input signals. Press SOURCE on the projector or remote control.

Adjusting the projected image

Adjusting the projection angle

The projector is equipped with 1 adjuster foot. This adjuster changes the image
height and projection angle. To adjust the projector:
Screw the front adjuster foot to adjust the height.
ViewSonic
to highlight the LANGUAGE, press Enter to
3. Press to select the language you need and press
Enter.
4. Press MENU on the remote control to leave and save
the settings.
11
PJD2121