Description Of Each Menu - ViewSonic PA502X User Manual

Description of each menu

Function
Screen Color
Aspect Ratio
Keystone
Position
Phase
H. Size
Digital Zoom
OverScan
3X Fast Input
Color mode
Brightness
Contrast
Color Temperature
See "Using Screen Color"
See "Selecting the aspect ratio"
See "Perform keystone correction"
Displays the position adjustment page. To move the
projected image, use the directional arrow keys. The
values shown on the lower position of the page change
with every key press you made until they reach their
maximum or minimum.
This function is only available when a PC input signal is
selected.
The adjustment range may vary under different timings.
Adjusts the clock phase to reduce image distortion.
This function is only available when a PC input signal is
selected.
Adjusts the horizontal width of the image.
This function is only available when a PC input signal is
selected.
Zoom in or out picture.
To avoid the appearance of the distorted image at the
edge of the screen, use over-scanning technology
to expand the image by 5% or even 10%, and the
distorted image extends to the place outside the
screen; only the middle part with better linearity is
shown.
Selecting On enables the function. This feature helps
reduce the frame rate. Enabling quick response
in local timing. The following settings will return to
factory defaults when enabled: aspect ratio, keystone
correction, position, zoom, over scan. This function is
only available if the optimum resolution input signal is
selected.
See "Selecting a picture mode"
See "Adjusting Brightness"
See "Adjusting Contrast"
For more details, please refer to
Color Temperature" and
temperature".
41
Description
for details.
for details.
for details.
for details.
for details.
for details.
"Selecting a
"Setting a preferred color