Philips HomeRun 3000 Series Manual page 6

2
1
Charging the robot
Install the mop pad holder, washable mop pad, and the side
brush
1 Attach the side brush by clicking it into the correct position on the bottom of
the robot.
2 Attach the mop pad holder to the bottom of the water tank of the robot.
3 Slide the straight side of the washable mop pad in the correct slot of the mop
pad holder and attach the washable mop pad to the velcro material of the
mop pad holder.
Attention: Even if you charge the robot for the first time, the station will start
vacuuming the robot empty. This is not an error, but is part of the normal
charging procedure.
1 Press the on/off switch on the bottom of the robot to switch on the robot.
2 Turn the robot to its correct position and put the robot on the floor in front of
the station.
3 Make sure that the station is connected to the wall socket.
English
9