Philips HomeRun 3000 Series Manual page 22

2
3
1
Cleaning the sensors, contact points and IR signal window
Replacing the dust bag
2 Use a brush with soft bristles (e.g. a toothbrush) to remove dust or fluff from
the front caster wheel and main wheels.
You can use the brush end of the cleaning tool to remove dust or fluff
from the wheels.
To maintain good cleaning performance, you have to clean sensor, contact
points and IR signal window from time to time.
1 Unplug the station from the wall socket
2 Use a soft non-abrasive dry cloth. If necessary, lightly moisten the cloth.
3 Clean the components.
Note: Do not use cleaning detergents.
4 Dry the components and surfaces with a dry cloth.
Note: Do not use other ways to dry the components.
When the orange LED on the auto-empty station flashes indicating that de dust
bag is full.
1 Open the lid of the Auto-Empty station.
English
25