Table of Contents
Advertisement
STEP 3. ADJUSTING THE DOOR SPRINGS
TYPE A
The door springs are on the sides of the dishwasher.
If necessary, pull out the dishwasher and adjust the
tension of the door springs. A good idea is to try
adjusting one side only first.
1.
Be sure the door is closed.
2.
Grab the front end of the spring and pull it up and
forward to release it from the forward mount.
3.
Loosen the spring from the rear mount by turning
it outwards.
4.
Adjust the spring tension using one of the following
methods depending on how much adjustment is
needed.
If you need to adjust the spring a lot, place the rear
mount in another hole. Place the spring further
forward to reduce the tension and further back to
increase the tension.
If you want to make small adjustments to the
spring, hold the back end with one hand and turn
the forward mount clockwise or counterclockwise
one or more times. Turn the mount clockwise to
increase spring tension and counterclockwise to
reduce spring tension.
Page 11
TYPE A
TYPE B (SEE PAGE 12)
Increase spring tension
Customer Care Center
1-800-898-1879
www.askousa.com
Reduce spring tension
Advertisement
Table of Contents
