PowerNg On/Off The Projector - ViewSonic PJ556D User Manual

Powering On/Off the Projector
Powering on the projector:
1. Remove the projector lens cap.
2. Complete the AC power cord and perpheral sgnal cable(s) connectons.
3. Press button to turn on the projector.
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatcally
detects your source.
When searchng message appears on the screen, ensure that the approprate
sgnal cable(s) are securely connected.
The sgnal message wll appear on the screen when the source s detected.
If you are connectng multple sources to the projector smultaneously, press
Source button.
Warnng:
Remove the lens cap first before powering on.
Never look nto the lens when the lamp s on. Ths can damage your eyes. It
s especally mportant that chldren are not allowed to look nto the lens.
Powering Off the Projector:
1. Press button to turn off the projector lamp. You wll see a message "Power
Off? Press Power agan" appear on the screen.
2. Press button again to confirm.
3. The coolng fans contnue to operate for coolng cycle and the Lamp LED goes
out.
When the Power LED begns flashng, the projector has entered standby
mode.
If you wsh to turn the projector back on, you must wat untl the projector has
completed the coolng cycle and has entered standby mode.
Once n standby mode, smply press button to restart the projector.
4. Dsconnect the power cord from the electrcal outlet and the projector.
5. Do not turn on the projector mmedately followng a power off procedure.
Please wait until the fan motor and the Lamp LED turn off before removing
the AC power cord from the projector.
15 ViewSonic PJ556D