Advertisement
Quick Links
QUICK START GUIDE
FEATURES:
• 1/2.7" 8.0 Megapixel [4K] CMOS Image Sensor
• Up to 20fps @ 8MP (3840 × 2160), 6MP (3072× 2048 ), 5MP
(2592 ×1944 ), 720P (1280 × 720), D1, CIF, 480 × 240
• 2.8~12mm Motorized Varifocal Lens
• 3 Matrix IRs with up to 165' IR Range
• Digital Wide Dynamic Range (D-WDR)
• True Mechanical Day/Night function by ICR
• XD-DNR (3D & 2D-DNR) Noise Reduction
• Region Intrusion Detection, Scene Change Detection, Line
Crossing
• H.265, H.264 Compression
• MicroSD Card Slot for Local Recording (Up to 128GB)
• 1 Ch. Audio In + 1 Ch. Audio Out*
• Remote Viewing via CMS, IE, and iOS & Android Apps
• ONVIF Compliant
• IP67 Weather Resistance + IK10 Impact Rating
• Optional Junction Boxes (VT-TJB02A, VT-TJB021), Wall Mounts
(VT-TWM03, VT-TWMT-A1), Pendant Mounts (VT-PDMT-A1 [use
w/ VT-TJB02A], VT-TPDM-3 [use w/ VT-TJB021]) and In-Ceiling
Semi Flush Mount (VT-TFMT-L)
• 12VDC & PoE (Power over Ethernet) Operation
• Available in Ivory or Charcoal Gray (VTD-TND8RMEB)
*Please research local, state and federal laws
regarding the implementation of audio surveillance.
VTD-TND8RME
8 MegaPixel [4K] Indoor/
Outdoor WDR IP Motorized
PLEASE NOTE:
Complete User Guide, Software, Tools, and Updates are
available online. Scan the QR Code or visit:
http://www.vitekcctv.com/Downloads
Transcendent Series
Vandal Dome Camera
Advertisement
Related Manuals for Vitek VTD-TND8RME
Summary of Contents for Vitek VTD-TND8RME
- Page 1 VTD-TND8RME Transcendent Series 8 MegaPixel [4K] Indoor/ Outdoor WDR IP Motorized Vandal Dome Camera QUICK START GUIDE FEATURES: • 1/2.7” 8.0 Megapixel [4K] CMOS Image Sensor • Up to 20fps @ 8MP (3840 × 2160), 6MP (3072× 2048 ), 5MP (2592 ×1944 ), 720P (1280 ×...
- Page 2 Components and Accessories Camera Quick start guide 4 tapping screws PA 4×2 Rubber plug CVBS&DC Screwdriver ×4 Drill template Plastic plug IN cables Overview Ethernet Connector Audio Input (MIC) DC12V Power Connector Audio Output (HP) Micro SD Card Slot Alarm Input/Output Reset First connect the weather resistant cap to an ethernet patch cable, then connect the cameras ethernet adaptor.
-
Page 3: Installation
C onnecting A lar m I nput/O utput A lar m I nput A L A R M -I N Sensor A L A R M -G N D A lar m O utput A L A R M -C O M A lar m A L A R M -O P E N P ower S our ce... - Page 4 3. Route the cables and 3. Route the cables and connect the power & video connect the power & video cables, use the rubber plug cables, use the rubber plug Sponge to fill the gap of the mounting to fill the gap of the mounting base.
-
Page 5: Lan Configuration
LAN Configuration LAN Configuration Switch Switch Network Cable Network Cable Network Cable Network Cable MENU MENU IP Camera IP Camera Computer Computer Router Router The camera can be accessed on the local network either using the The camera can be accessed on the local network either using the IP-Tool or directly in a web browser. - Page 6 4. Double-click the IP address and then the system will pop up the web 4. Double-click the IP address and then the system will pop up the web browser to connect IP-CAM . IE browser will download the Active X browser to connect IP-CAM .
-
Page 7: Wan Configuration
2. Open the IE Browser and input the default address of IP-CAM and 2. Open the IE Browser and input the default address of IP-CAM and confirm. The IE browser will download Active X control. confirm. The IE browser will download Active X control. 3. -
Page 8: Limited Product Warranty
(3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is nontransferable and extends only to the original buyer or end user customer of a VITEK Authorized Reseller. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning.