Hiding The Image; Locking Control Keys - ViewSonic PJD5351 User Manual

Hiding the image

In order to draw the audience's full attention to the
presenter, you can use
on the remote control to hide the screen image. Press
any key on the projector or remote control to restore
the image. The word 'BLANK' appears at the lower
right corner of the screen while the image is hidden.
You can set the blank time in the
Basic > Blank Timer
return the image automatically after a period of time
when there is no action taken on the blank screen.
Once BLANK is pressed, the projector enters Economic
mode automatically.
CAUTION
Do not block the projection lens from projecting as this
could cause the blocking object to become heated and
deformed or even cause a fire.

Locking control keys

With the control keys on the projector locked, you can prevent your projector settings from
being changed accidentally (by children, for example). When the Panel Key Lock is on, no
control keys on the projector will operate except
1. Press
or go to the
Panel Key Lock menu
pressing
control.
2. A confirmation message displays. Select Yes to
confirm.
To release panel key lock, press and hold
seconds on the projector or remote control.
You can also use the remote control to enter the
SYSTEM SETUP: Basic > Panel Key Lock and
press / to select Off.
• Keys on the remote control are still functional
when panel key lock is enabled.
• If you press
without disabling panel key lock, the projector will
still be in locked status the next time it is turned
on.
on the projector or BLANK
SYSTEM SETUP:
menu to let the projector
on the projector or remote control
/
SYSTEM SETUP: Basic >
, and select On by
/ on the projector or remote
POWER to turn off the projector
I
I
I
POWER.
I
for 3
/
Operation 31