ViewSonic PJ402D User Manual page 34

Auto Shutdown
OSD Timeout
Menu Position
Factory Reset
Audio
Option Actions/Descriptions
Volume Adjusts the volume.
Select the desired setting with the  /  buttons:
Mute Cuts off the sound temporarily.
Select the desired setting with the  /  buttons:
ViewSonic PJ402D
Uses this function to automatically turn off the lamp if the
projector does not detect an input signal for specified time
period (0 minutes).
Select the desired setting with the  /  buttons:
ON
OFF
Duration OSD (On-Screen Display) menu stays active (at
idle state by second).
Select the desired setting with the  /  buttons.
Selects the position of the OSD (On-Screen Display) menu
on the screen.
Select the desired setting with the  /  buttons.
Resets the projector to its factory default settings.
Press the MENU\ENTER button on the Projector Control Panel
or the Enter button on the Remote Control to enter its sub-
menu, select the desired setting with the  /  buttons, and
confirm the selection with the MENU\ENTER button on the
Projector Control Panel or the Enter button on the Remote
Control again.
Press the  button to decrease the volume.
Press the  button to increase the volume.
ON
OFF
2