H4 Board Removal; K2 Board Removal; Ae Board Removal; Sensor Module Removal - Sony KDL-40X4500 Service Manual

2-13. H4 Board Removal

Clip
To remove the H4 board disconnect the connector and then release the
clip circled and gently ease the board towards you and away from the
back of the TV set.

2-15. AE Board Removal

Screws
To remove the AE board disconnect all connectors and then remove the
10 screws circled and ease the board gently away from the back of the
TV set.
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8 (9 Screws)
Screws
- 12 -

2-14. K2 Board Removal

To remove the K2 board disconnect all connectors and then remove the
4 screws circled and ease the board gently away from the back of the
TV set.
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8 (4 Screws)

2-16. Sensor Module Removal

Pic.1
Pic.2
To remove the sensor module remove the connector. Then remove the
'holder, touch' by releasing the 2 clips circled in Pic.1and then releasing
the 2 clips circled in Pic.2, you can then remove the the sensor module.
Screws