Step Five: Connect To Battery Charger - North Star 1572214 Owner's Manual

Operation - Using the Sprayer (continued)
Step 5: Connect to battery charger.
When finished using the sprayer, the battery can be recharged using the 2-pin connector port shown
below. Simply connect the 2-pin connector from the battery charger to the charging port.
NOTE: If the battery charger is not equipped with a 2-pin connector, disconnect both 2-pin
connectors on the system before attaching charger to the battery. Once disconnecting, the charger can
be connected directly to the battery with ring terminals or clamps.
2-pin charging port
2-pin connectors (disconnect if
attaching charger directly to battery)
27