Miele KFNS 7734 D Operating Instructions Manual page 77

The interior lighting is not working

Risk of electric shock due to exposed, live electrical components.
When removing the lighting cover, there is a risk of coming into contact with live
electrical components.
Do not remove the lighting cover. The LED lighting may only be repaired or
replaced by your Miele dealer.

Risk of injury from LED lighting.
This lighting corresponds to risk group RG 2. If the cover is defective, there is a
risk of eye injury.
If the lighting cover is defective, do not look from a close range directly into the
lighting with optical instruments (e.g. magnifying glass or similar).
Issue
The interior lighting is
not working.
Cause and remedy
The refrigeration appliance has not been switched
on.
 Switch the appliance on.
To avoid overheating, the lighting switches itself off
automatically after approx. 15 minutes if the door is
left open. If this is not the case, then there is a fault.

Risk of electric shock
There are live electrical components under the
lighting cover.
The LED lighting may only be repaired or replaced
by a Miele authorised service technician.

Risk of injury from LED lighting
The light intensity corresponds to laser beam class
1/1M. The lighting covers must not be removed or
damaged, or be removed due to damage. This
could cause injury to your eyes.
Do not look into the LED lighting (laser beam class
1/1M) with optical instruments (e.g. a magnifying
glass or similar).
 Call your Miele dealer.
Problem solving guide
77