Problem solving guide
Message
lights up red in the
display, a fault code F
with numbers appears
and an alarm also
sounds.
76
Cause and remedy
There is a fault.
To switch the alarm off touch in the display.
Contact your Miele dealer.
To report the fault you need the fault code and also
the model number and serial number of your
appliance. You can access these in the display.
To do this touch in the display.
The appliance data required will be shown in the
display.
Confirm with
OK
the fault code will be shown again in the display.
The appliance can be switched off directly from the
fault code display.
Touch .
There is an appliance fault: this display always has
priority over any settings which have just been
selected.
An appliance fault has priority over any current door
and/or temperature alarms displayed.
to exit the information display and