Anode Cap - Sony TRINITRON BVM-A14F5M Service Manual

1-3-18. Anode Cap

n
Short-circuit the anode of the CRT and the anode cap to the metal chassis, CRT shield or carbon painted on the CRT, after
removing the anode.
. . . . . Removal Procedure
a
a
(1) Turn up one side of the rubber cap in the
direction indicated by arrow a.
. . . . . Handling Precautions
(1) Do not scratch the surface of anode cap with a sharp object.
(2) Do not press the rubber so hard that it damages the inside of
anode caps. A shatter-hook terminal is built into the rubber.
(3) Do not turn the foot of the rubber over.
The shatter-hook terminal will stick out or damage the rubber.
1-18
b
b
(2) Using a thumb, pull up the rubber cap
firmly in the direction indicated by
arrow b.
c
Anode button
(3) When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up the rubber cap and pulling up it in
the direction of the arrow c.
BVM-A14