Table of Contents
Advertisement
4
INSTALLING THE DRIVERS
■ Checking the COM port— continued
D
Microsoft
®
Windows
Start Windows.
q
• When opening the Device Manager, log in as the admin-
istrator.
Connect the PC and the ID-RP4000V [SERVICE T]
w
connector with the USB cable.
Move the mouse pointer at the left-bottom corner of
e
the desktop.
Move the mouse pointer
around here.
Right-click the <START> icon, and then click "De-
r
vice Manager."
• The "Device Manager" window appears.
q Right-click
®
8
w Click
Double-click "Ports (COM&LPT)" on the "Device
t
Manager" screen to check the COM port number.
• When the driver is completely installed, "ICOM ID-
RP4000V SERVICE T (COMM)" is displayed. The screen
shows the USB serial COM port number "4."
• The COM port number is displayed instead of "
If the repeater has two COM ports, two COM port
numbers are displayed.
• Depending on the PC environment, the COM port
number may differ.
• If "!" or "×" is displayed on the "Device Manager"
screen, the driver may not be properly installed. In
this case, first uninstall the USB driver, then rein-
stall it.
17
17
Double-click
."
M
Advertisement
Table of Contents
