Advertisement
Troubleshooting
Refer to following chart if the air conditioner operates abnormally. This may
save time and unnecessary expenses.
PROBLEM
The air conditioner
does not work at all.
The temperature
adjustment is not
working.
Heating operation
is not working.
Fan speed
adjustment is not
working.
Remote controller
does not work.
PAC Queen_AM048HNPDCH_EN_DB68-04906-00.indd 20
• Check power status and then operate the air
conditioner again.
• Check whether the power plug is connected
correctly or the auxiliary power switch is switched
on.
• If the air conditioner is switched off by the Timer
function, press the On/Off button.
• Temperature adjustment is not available when the
Fan mode is selected.
• Check if the air conditioner is 'Cooling only' model
since they doesn't provide Heating operation.
• Check if you are using the remote controller
for 'Cooling only' model. You need appropriate
remote controller that supports both Cooling and
Heating operation.
• Check if you have selected Auto/Dry/Turbo mode.
In these modes, fan speed is set to Auto and you
cannot adjust the fan speed.
• Replace the exhausted batteries with new ones.
• Do not block the remote controller receiver.
• If the remote controller is used near strong light
(3-wavelength fluorescent light, neon sign etc.),
the remote controller may not work due to the
electronic jamming signal
ENGLISH-20
SOLUTION
2014-09-17 오후 3:19:36
Advertisement
