Table of Contents
Advertisement
Unpacking and Setting Up the PG 720
2.2
Moving the Programming Device
Preparations
The PG 720 is easy to carry. Before carrying it, however, you should
take the following measures:
1. Shut down the operating system. To prevent data loss, you must
2. Unplug all the connecting cables.
3. Close the covers protecting the ports and connections on the
4. Bring the unit into an upright position.
5. Raise the keyboard and lock it by pressing it against the front panel
6. If you only want to carry the unit for a short distance, use the
7. If you want to move the PG 720 over larger distances, pack the unit
Figure 2-5 PG 720 Ready for Transport
Carrying the
Despite the rugged design of the PG 720, its internal components are
PG 720
sensitive to severe vibration or jolts. When moving the PG 720, you
must therefore make sure that it is protected from severe mechanical
forces.
Use the original packing material if you have to ship the PG 720 from
one location to another.
2-6
exit Windows 98 completely. Windows 98 issues a message to
inform you when it is safe to switch off the device.
right-hand and left-hand side panels.
of the unit. The latches on the right and left snap in. Make sure that
both catches are properly locked.
handle.
and all its accessories in the carrying bag supplied.
PG 720 PII Programming Device
C79000-G7076-C756-02
Advertisement
Table of Contents
