Storage - MULTIQUIP Mikasa Series Operation Manual

and blow dry from the inside out with low-pressure
compressed air.
NOTICE
Be careful to avoid bending or puncturing the spark
arrester screen.
4. Replace the spark arrester if the screen cannot be
adequately cleaned or if any damage is observed.
5. Secure the spark arrester and muffler deflector to the
muffler guard using the three M4 hex flange screws
that were removed in step 2.
SPARK ARRESTER
SCREEN
Figure 31. Cleaning The Spark Arrester

STORAGE

1. Wash off dirt and soil from every part with water. While
washing, be careful not to let the water splash on the
electric components such as the engine muffler.
2. Cover the machine to prevent dust and dirt buildup.
3. Store the machine in a dry area away from direct
sunlight.
4. Do not leave the machine outdoors. Keep it indoors.
5. When not used for a long period of time, drain the fuel
from the fuel tank.
6. When the machine is used after a long storage period,
check the level of engine oil before using.
MVH408GV PLATE COMPACTOR • OPERATION MANUAL — REV. #0 (05/01/23) — PAGE 27
WIRE BRUSH
MAINTENANCE/STORAGE