Table of Contents
Advertisement
12.11 Opening the door when
the programme operates
While a programme operates, the
appliance door is locked and the
indicator
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the door.
1. Turn the programme knob to position
to deactivate the appliance.
2. Wait for some minutes and then open
the appliance door.
3. Close the appliance door.
4. Set the programme again.
12.12 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• In the display
• The indicator of the
• The door lock indicator
a few minutes, then goes off.
• You can open the door.
• Remove the laundry from the
appliance. Make sure that the drum is
empty.
• Close the water tap.
• Turn the programme knob to position
to deactivate the appliance.
• Keep the door ajar, to prevent the
mildew and odours.
The washing programme is
completed, but there is water in the
drum:
• The drum turns regularly to prevent
the creases in the laundry.
• The door lock indicator
indicator
locked.
13. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
is on.
comes on.
goes off.
flashes for
is on. The
flashes. The door stays
• You must drain the water to open the
door.
To drain the water:
1. If necessary, decrease the spin
speed. If you set
only drains.
2. Press
. The appliance drains the
water and spins.
3. When the programme is completed,
the door lock indicator
a few minutes. When it goes off, you
can open the door.
4. Turn the programme knob to position
to deactivate the appliance.
The appliance drains and
spins automatically after
approximately 18 hours
(except for Wool
programme).
12.13 Stand-by
Some minutes after the end of the
washing programme, if you do not
deactivate the appliance, the energy
saving status activates.
The energy saving status decreases the
energy consumption when the appliance
is on the stand by.
• All indicators and the display go off.
• The indicator of the
• Press one of the options to deactivate
the energy saving status.
If you set a programme or an
option that ends with water
in the drum, the energy
saving status function
doesn't activate to remind
you to drain the water.
ENGLISH
23
, the appliance
flashes for
flashes slowly
Advertisement
Table of Contents
