Switching On And Off - Philips 74X6 Series User Manual

4
Switching On and
Off
Make sure the display is connected to the mains AC
power. The indicator light at the bottom of
the display lights up.
Switch on
Press Power on the remote control to switch
the display on. You can also press the small joystick
key on the bottom of the display to switch
the display on in case you can't find the remote
control or its batteries are empty.
Switch to standby
To switch the display to standby, press Power on
the remote control. You can also press the small
joystick key on the bottom of the display.
-Schematic diagram of joystick position
In standby mode, the display is still connected to the
mains power but consumes very little energy.
To switch off the display completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
8