Table of Contents
Advertisement
audio device if there is a USB audio peripheral
attached to the display USB port. USB Audio is only
available when the device TAH6206 is detected.
Digital Output
Digital output settings are available for optical and
HDMI ARC sound signals.
Set the audio out signal of the display to fit the
sound capabilities of the connected Home Theatre
System.
Digital Output Delay
For some Home Theatre Systems, you might need to
adjust the audio sync delay to synchronize the audio
to the video. Select 0 if a sound delay is set on your
Home Theatre System.
DTS night mode
Select DTS night Mode for a more comfortable quiet
listening experience when watching content with DTS
Master Audio.
Dolby audio processing
Set the advanced settings.
• Volume Leveler: select On to adjust the volume
automatically.
• Dialogue Enhancer: select to get improved sound
quality for the speech programme.
• Surround Virtualizer: select On to create a virtual
surround sound experience.
• Dolby Atmos: select On to enable Dolby Atmos,
which can add a height dimension to sound. Sound
can be precisely placed and moved in three-
dimensional space with the height dimension.
Reset to Default
Reset the current sound settings to default.
10.4
Power Settings
MENU > options > Power.
Set Sleep timer
Power > Sleep timer.
Display switches to standby mode automatically
after a preset time.
Set screen off to save energy consumption
Power > Picture off.
Select Picture off, the display screen is switched off,
to switch the display screen back on, press any key
on the remote control.
Set Display switch off timer
Power > Switch off timer.
Select Switch off timer, the display switches off
automatically at a preset time to save energy.
No signal auto power off
Power > No signal auto power off.
Press Navigation keys up or down to set the
value. Select Off to deactivate the automatic switch
off.
* If you use the display as a display or use a digital
receiver to watch display (a Set-Top Box - STB) and
you do not use the remote control of the display, you
should deactivate this automatic switch off, to set the
value to Off.
Set auto sleep timer
Power > Auto sleep.
Display switches to sleep mode automatically after a
preset time if the display does not receive any
command from remote control.
10.5
Advanced Options
Blue Mute
MENU > options > Advanced Options > Blue
Mute.
Switch the blue mute on or off.
10.6
Other settings
Device Preferences
Home > Settings > Device Preferences.
System update
Update display software from local update or from
the Internet.
About
To show the information about this display or
perform Factory reset operation for the display.
21
Advertisement
Table of Contents
