To Register The Magic Remote Control; To Re-Register The Magic Remote Control - LG CineBeam HF65LA Manual

30
To Register the Magic Remote Control
To use the Magic Remote control, register it with your projector first.
1
Put batteries into the Magic Remote and turn the Projector on.
2
Point the Magic Remote at your projector and press the
the remote control.
• If the projector fails to register the Magic Remote, try again after turning the
projector off and back on.
To Re-register the Magic Remote Control
1
Press the and
the Magic Remote with your projector.
2
Wheel (OK) button towards the projector to re-register the
Press the
magic remote control.
• Pressing and holding the
Remote at once.
buttons at the same time, for five seconds, to unpair
button will let you cancel and re-register Magic
Wheel (OK) on