Pantech Crux User Manual page 37

3. Tap one of the following options and then tap the desired submenu option
Change to
in the field to select:
• Mode: Tap the voice command system mode from the following:
- Prompts: For handset to prompt for required information.
Tones Only: For handset to provide beeps only for audio guidance.
-
• Audio Playback: Allows audio playback to play through the speakerphone or earpiece.
Tap Speakerphone or Earpiece.
• Timeout: Tap a period of time either
for a command before timing out.
ABOUT
1. Slide the phone up, tap Settings
2. Tap Voice Commands Settings
3. View the version information about Nuance.
LANGUAGE
To set the language of the display:
1. Slide the phone up, tap Settings
2. Tap Language.
3. Tap a language in the Change to
LOCATION
The Location (GPS) service allows the network to detect and find your current location.
1. Slide the phone up, tap Settings
2. Tap Location.
Full Detection
3. Tap to allow the network to detect your location.
To detect your location only in E911 mode, tap
When Lock Setting is set for Location Setting
you will need to enter a lock code. The default lock code is the last 4 digits of your
phone number.
70
5 seconds or 10 seconds which the system listens
and then tap Phone Settings.
and then tap About.
and then tap Phone Settings.
field to select.
and then tap Phone Settings.
E911 Only.
under Restrictions on the Security
CURRENT COUNTRY
Allows you to set the country of your current location so that your phone works properly
while you travel.
1. Slide the phone up, tap
Current
2. Tap
3. Tap a country in the
SECURITY
The Security menu allows you to electronically secure the phone. To access this menu,
you must enter the 4-digit lock code. The default lock code is the last 4 digits of your
phone number.
EDIT CODES
To change the lock code:
1. Slide the phone up, tap
2. Tap Security.
3. Enter the 4-digit lock code.
4. Tap Edit
5. Tap one of the following settings:
• Phone Only: Allows you to edit the lock code for Security.
Calls & Services: Allows you to edit the lock code for Restrictions.
•
6. If you selected
4-digit lock code again to confirm your input.
If you selected
new 4-digit lock code again to confirm your input.
RESTRICTIONS
menu,
Use the following procedure to configure Location Setting, Calls and Messages
restrictions.
1. Slide the phone up, tap
2. Tap Security.
Settings and then tap
Country.
Change to field to select.
Settings and then tap
Codes.
Phone Only, enter the new 4-digit lock code. Enter the new
Calls & Services, enter the new 4-digit lock code. Enter the
Settings
and then tap
01
Phone Settings.
02
03
04
05
06
07
Phone Settings.
08
Phone Settings.
71