Touch Settings; Phone Settings - Pantech Crux User Manual

TOUCH SETTINGS

Allows you to set the phone to vibrate when you touch the screen and set the vibration
level.
Settings
1. Slide the phone up, tap
2. Tap OFF or ON to set the phone to vibrate at your touch.
3. If you set to ON, tap the option next to
Change to field to select.

PHONE SETTINGS

Allows you to customize the phone settings of your phone.
VOICE COMMANDS SETTINGS
Allows you to set options for Voice Commands.
CONFIRM CHOICES
When the phone does not recognize your voice command, it will ask you to repeat
your voice command. If it does not recognize the name or number, it will display a
list of up to three choices and speak each one in turn. You can control how often the
phone asks you to confirm the recognized name or number.
1. Slide the phone up, tap Settings
Voice Commands Settings
2. Tap
To view information about each option, tap Info.
3. Tap a confirmation choice in the
SENSITIVITY
The Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones.
If you frequently experience the messages
NOT RECOGNIZED Try again?", adjust the sensitivity toward
frequently experience false activations (when the phone recognizes a name you
didn't say), adjust the sensitivity toward
68
Touch Settings.
and then tap
Vibrate Level. Tap a vibrate level in the
and then tap Phone Settings.
Confirm Choices.
and then tap
Change to field to select.
"Please try again" or "COMMAND
Less Sensitive. If you
More Sensitive.
1. Slide the phone up, tap Settings
2. Tap Voice Commands Settings and then tap Sensitivity.
3. Tap Automatic, More Sensitive, or
ADAPT VOICE
Voice Commands are speaker independent, which means that no training
or adaptation is required. Some users with heavy accents or unusual voice
characteristics may find difficulty in achieving high accuracy with speaker
independent Voice Commands, so the Adapt Voice feature allows users to
dramatically improve the recognition accuracy after adapting their voices.
Users who get acceptable recognition accuracy will find no additional benefit to
performing the Adapt Voice feature.
1. Slide the phone up, tap Settings
2. Tap Voice Commands Settings and then tap
Train Voice.
3. Tap
• Train Voice: Requires that you make recordings of your voice to customize the voice
recognition system. It will take a few minutes.
• Reset Voice: Once you finish the adaptation process, you can reset the adaptation to
the factory default. The Reset Voice option only appears after you finish the Train Voice
process.
4. Tap OK to begin.
5. Wait for the beep, and then repeat the sentences using a normal tone of
voice.
6. When you are finished with a full session, you will reach a screen that reads
"Adaptation complete. "
PROMPTS
Allows you to select voice command system characteristics.
1. Slide the phone up, tap Settings
Voice Commands Settings and then tap Prompts.
2. Tap
and then tap Phone Settings.
Less Sensitive Change to
in the field.
and then tap Phone Settings.
Adapt Voice.
and then tap Phone Settings.
01
02
03
04
05
06
07
08
69