General Technical Features Of The 1Fg1 Servo Geared Motor - Siemens SIMOTICS S-1FG1 Operating Instructions Manual

Description
3.1 Technical features and ambient conditions
China RoHS
SIMOTICS motors comply with the China RoHS.
You can find more information at:
China RoHS (https://support.industry.siemens.com/cs/de/de/view/109738670/en)
3.1.2

General technical features of the 1FG1 servo geared motor

Motor type
Magnet material
Cooling
Total weight
Insulation of the stator winding according to EN 60034-1
(IEC 60034-1)
Impulse voltage insulation class according to EN 60034-18-41
(IEC 60034-18-41)
Operating range
Installation altitude according to EN 60034-1 (IEC 60034-1)
Degree of protection according to EN 60034-5 (IEC 60034-5) IP65
Temperature monitoring
Paint finish
Sound pressure level L (1 m) according to DIN EN ISO 1680,
pA
max. tolerance + 3 dB(A)
Built-in encoder systems for motors without DRIVE-CLiQ inter‐
face
30
Permanent-magnet synchronous motor
Rare-earth magnetic material
Natural cooling
See rating plate
Temperature class 155 (F) for a winding temperature of
ΔT = 100 K at an ambient temperature of +40 °C
IVIC: C
-15 °C to +40 °C, derating at higher temperatures
≤ 1000 m above sea level, otherwise power derating
The degree of protection only refers to the component motor.
When selecting higher degrees of protection, take the equip‐
ping on the gearbox side into account. Protect the shaft outlet
on the gearbox from contamination/splashwater.
Protection against water alone is not adequate for liquids that
contain oil, can creep and/or are aggressive. In such cases,
protect the servo geared motor with a suitable cover.
Temperature sensor in the stator winding
Anthracite (similar to RAL 7016)
1FG1 ... - .. C SH 36
1FG1 ... - .. D SH 48
1FG1 ... - .. E SH 63
1FG1 ... - .. F SH 80
1FG1 ... - .. G SH 100
• IC2048S/R incremental encoder sin/cos 1 Vpp, 2048 S/R
with C and D tracks for SH 36 to SH 100
• AM2048S/R absolute encoder 2048 S/R
revolutions, with EnDat2.1 interface for SH 36 to SH 100
• Resolver, multipole (number of pole pairs corresponds to
number of pole pairs of the motor)
• AM25EN22 absolute encoder, 25-bit singleturn, 4096 rev‐
olutions, with EnDat2.2 interface for SH 48 to SH 100
• 2-pole resolver
Operating Instructions, 12/2022, A5E47360747B/RS-AC
65 dB(A)
65 dB(A)
70 dB(A)
75 dB(A)
75 dB(A)
, multiturn, 4096
1)
SIMOTICS S-1FG1 servo geared motor
1)