How do i connect my wireless headset with the link 14201-41 to my cisco 8941 or 8945 desk phone so i have remote call control using my headset (2 pages)
Page 1
"AUX" socket on your Jabra PRO 94x0 base. 3. With the cable marked white D, connect the Headset / Handset socket on your Jabra LINK EHS Adapter to the 3.5 mm headset socket on the side of your desk phone.
Page 2
10 seconds before taking the call. The appropriate EHS mode should now be installed. If the automatic configuration has not worked, please select DHSG mode manually. Base setup: Set the phone set-up switch to position "A". https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707- Page 2 of 4 103/faq/8df8fc6e-dbbb-43d7-ae3d-d33e7ff4bbf7...
Page 3
24/11/2022 16:30 Microphone level setup: Remove the cover from the base of the Jabra PRO 9450 and make a call with the headset, to a colleague for example. If you are too loud or too quiet to the person you are calling, please use the volume adjuster until you achieve the optimum volume level.
Page 4
In the event that you still do not have a dial tone signal transfer despite setting the correct ring tone, check the following settings: Menu > Settings > Phone > Internal/External > other options No tone, progressive, bleep tones > all items must be set to "OFF". https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707- Page 4 of 4 103/faq/8df8fc6e-dbbb-43d7-ae3d-d33e7ff4bbf7...