Panasonic WJ-ND200 Operating Instructions Manual page 13

Play recorded images on the removal hard disk drive
Screenshot 1
Start operation from the operation window after select-
ing the connected removable hard disk drive.
Descriptions of the playback operation buttons
REV PLAY
Pausing
Frame play/reverse
frame play
Step 1
Click the [PLAY] button.
→ Playback of recorded images will start.
displayed in the status display area.
Notes:
• The pointer on the slider will indicate the current
playback point.
• When playback is started by selecting a recording
event listed in the search result, the selected record-
ing event in the search result list will remain selected
even when playback of the next recording event
starts. (The recording event currently being played
will not be highlighted in the search result list if it is
not the selected recording event from the search
result list.)
• Reverse playback will start.
• Playback will be stopped when this button is clicked during
playback.
• The frame display and the reverse frame display are available
only during playback or pause.
• When the [NEXT IMAGE] button is clicked, the next frame is
played and paused.
• When the [PREV IMAGE] button is clicked, the previous frame
is played and paused.
Note:
When the image currently being played is in MPEG-4 format,
some frames of recorded images will not be displayed.
Reverse frame play will be performed with the set refresh
interval of the camera.
will be
13