Advertisement
Check Point
Smooth operation of
Steering cum Ignition lock,
Lock Operation
Seat lock, Petrol Tank cap
lock
Battery charge condition
Battery *
Battery terminals tightness &
Petroleum jelly application.
Air pressure in Front & Rear
Tyre Pressure
tyre
What to check
How to check
By using vehicle key.
As per SOP
Carry out cable
connections.
1.Check air pressure in both
tyres using tyre pressure
gauge.
2.Refill air using by
Pneumatic connection /
Good quality foot pump.
Recommendation /
Reference
Insert vehicle key in lock &
check operation of
respective lock.
Green LED-Battery fully
charged.
Yellow LED -Battery partially
discharged.
Red LED-Battery deep
discharged.
Ensure firm connection of
+ve & -ve terminals, apply
petroleum jelly & ensure
protection cap fitment on +ve
terminal
Front - 1.75 Kgf/cm² (25 PSI)
Rear solo - 2 Kgf/cm² (28
PSI)
Rear with pillion -2.25
Kgf/cm² (32 PSI)
Tools ,
Workshop
equipment &
Observation
consumables
required
1. Midtronics
battery tester,
2. Battery
chargers (
VRLA)
3. Petroleum
jelly
Tyre pressure
gauge.
78
Advertisement
