A2 Voip Requirements Checklist - Panasonic KX-TDA0484 Getting Started

A2 VoIP Requirements Checklist
Use the following checklists to see if you can implement a VoIP network. The answers identified
in underlined bold-face letters are the required answers for the corresponding questions.
Bandwidth Assessment
No.
Does the network have enough
bandwidth to support VoIP
communications?
1
Make sure that there is more bandwidth
available for VoIP communications than the
amount actually required.
Network Configuration
No.
Is the IP network a managed network?
Make sure to use a managed IP network
such as Frame Relay, Leased Line, or IP-
2-a
VPN (Virtual Private Network). The VoIP
Gateway Card is not intended for use on
the Internet.
Is it possible to have static IP
2-b
addressing?
Is network address translation (NAT/
2-c
NAPT) disabled?
Does only a single router provide
2-d
access to the IP network?
Is there only a single IP network
2-e
between two ends of a call?
2-f Is the card located appropriately?
Question
Question

A2 VoIP Requirements Checklist

Answer Memo
• IP network bandwidth
=
Yes
• Available bandwidth for VoIP
=
No
• Required bandwidth for VoIP
=
Answer Memo
Type of IP network:
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
No. of hops (routers/switches)
Yes
within one location:
No
Ref.
kbps
p. 52
kbps
kbps
Ref.
p. 53
p. 54
p. 54
p. 55
p. 56
p. 57
Getting Started 59