Replace Display Pcb And Assembly - Friedrich Chill Premier Inverter Series Service Manual

Replace Display PCB and Assembly

Warning:
Ensure there are no open flame
sources or hot surfaces that exceed 1200˚F in the work
area.
Warning:
Discharge capacitors in a
way that won't cause any spark. The standard
procedure to short circuit the capacitor terminals
usually creates sparks.
1. Remove grill, air filter, and vane from
front panel assembly. Refer to Dissaseembly
instructions.
2. Remove Front Panel . Refer to dissasembly
instructions.
3. Remove Cabinet Assy. Refer to dissasembly
instructions.
4. Remove Shield Box
5. Disconnect display connector from main PCB. See
Figure 601.
6. Disconnect Sensor Connector from Display PCB
Harnerss. See Figure 601.
(Continued)
56
UNIT DISSASEMBLY
Figure 601