Assembling Upper And Lower Legs; Assembling Lower Stiffeners - RIDGID TP1300 Operator's Manual

Assembling Upper and Lower Legs

1. Locate the following parts and hard-
ware:
8 Cariage Bolts M8 x 1.25
8 Hex Flanged Nuts M8 x 1.25
4 Upper Legs
4 Lower Legs
4 Feet
2. Position the lower leg inside the upper
leg as shown. Place a bolt only through
the bottom hole of the upper leg and
through the bottom hole of the lower
leg. Attach a nut but only finger tighten.
3. Repeat for other three leg assemblies.
4. Asemble foot to bottom of lower leg.
Repeat for other three leg assemblies.

Assembling Lower Stiffeners

1. Locate the following parts and hard-
ware:
8 Carriage Bolts M8 x 1.25
8 Hex Flanged Nuts M8 x 1.25
2 Long Lower Stiffeners
2 Short Lower Stiffeners
Carriage Bolts
M8 x 1.25
Upper Leg
Nut
Bolt
Bottom
Hole
Foot
Carriage Bolts
M8 x 1.25
Long Lower
Stiffener
13
Hex Flanged Nut
M8 x 1.25
Lower Leg
Upper Leg
Bottom
Hole
Lower
Leg
Hex Flanged Nut
M8 x 1.25
Short Lower
Stiffener
Nut
Bolt