Table of Contents
Advertisement
Alignment and Adjustments
14. MOVE CURSOR FORWARD
Press to move the cursor right or down.
15. MOVE CURSOR REVERSE
Press to move the cursor left or up.
16. CONVERGENCE PICTURE MOVE BUTTON
17. CONVERGENCE MOVE BUTTON
Press to move the convergence left (
18. CONVERGENCE DATA ZERO BUTTON
Press to zero the convergence correction data.
19. INITIAL DATA SET BUTTON
Changes when applying Almighty-Cg, Module (How to extract the basic Cg Data)
Model Name
Inch (Type)
Representative
PCL545R/
54" (54J9)
PCL5415R
62" (62J9)
PCL6215R
HCL552W/
55" (552W)
5515W
HCL652W/
65" (652W)
6515W
HCL472W/
47" (472W)
4715W
20. Move Convergence Pattern P54A Service Manual
After pressing the R.surf button, use the Channel Up/Down and Volume +/- buttons to move the
Convergence Pattern up/down/left/right.
21. Convergence Pattern Tilt Control Button
After pressing the ANT A/B button, use the Channel Up/Down and Volume +/- buttons to create a tilt
to the Convergence Pattern.
Note : Use the following two buttons only when they are indispensable.
4-22
Basic Data
Number after entring
the Cg-Mode
Model
5-545 (Press in regular order)
5-625 (Press in regular order)
5-552 (Press in regular order)
5-652 (Press in regular order)
5-473 (Press in regular order)
) or right (
) .
Screen Display
R.surf
ANT A/B
Discription
White Cross on the background
(white cross)
White Oval on the background
(white border)
White Oval on the background
(white border)
White Square on the backgrand
(white border )
Samsung Electronics
Advertisement
Table of Contents
