Haier HWD100-BP14939 User Manual page 21

Table of Contents

Advertisement

EN
8-6
8-7
8-8
8-9
8-11
8-10
8-12
8-13
8-Care and cleaning
8.5 Long periods of disuse
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 8-6).
2.
3. Open the door to prevent formation of moisture
and odours. Let door open while not used.
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leackage.
8
for instance if the appliance:
Doesn´t drain the water.
Doesn´t spin.
Cause unusual noise while running.
WARNING!
hot! Before any action please ensure water has
cooled down.
1.
2. Push and open service flap (Fig. 8-9).
3. Provide a flat container to catch leach water
(Fig. 8-10). There could be bigger amounts!
4. Pull the drainhose out and hold its end above the
container (Fig. 8-10).
5. Take the sealing plug out of the drainhose (Fig.
8-10).
6. After complete drainage close drainhose (Fig.
8-11). and push it back into the machine.
7. Unscrew and remove counter clockwise the pump
8
8. Remove contaminants and dirt (Fig. 8-13).
EN
8
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hwd90-b14939s8

Table of Contents