6
Setup and Reset
6.6
Source Detection
You can activate
Not available when
6.6.1 Configuring Source Detection
1
When the Function Key Guide appears, select [
Next, press the JOG button.
2
Move to
System
3
Move to
Source Detection
The following screen will appear.
Auto: The input source is automatically recognized.
Manual: Manually select an input source.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
Source
Detection.
PIP/PBP Mode
is set to On.
controlling the JOG button UP/DOWN and press the JOG button.
controlling the JOG button UP/DOWN and press the JOG button.
System
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
] by moving the JOG button UP.
Decide how input
sources will be
Off
detected.
Off
Auto
1.2
Auto
Manual
Return
76
6 Setup and Reset