Panasonic AW-E860 Operating Instructions Manual page 9

DOS
• Refer any servicing to qualified service personnel.
• Handle the camera with care.
• Protect the precision made lens by placing the lens cap
over when the camera is not in use. If the lens is not
installed, protect the surface of the prism by placing the
body cap into the lens mount hole.
• Use a mild blower or lens cleaning tissue designed for
coated lenses, to clean the surface of the lens or prism in
the event that it should become dirty.
• Use a dry cloth to clean the camera if it is dirty. In case the
dirt is hard to remove, use mild detergent and wipe gently.
• Use caution when operating the camera in the vicinity of
spot lights or bright lights, as well as light reflecting objects
and surfaces.
• Take immediate action if ever the camera or RCU should
become wet. Turn the power off and have the unit checked
by an authorized service facility.
• Follow normal safety precautions to avoid personal injury.
• Use the camera in an environment where the temperature
is within 14°F to 113°F (–10°C to +45°C), and the relative
humidity is within 30 % to 90 %.
• Always turn the power off when the camera is not going to
be used. Operate the camera and RCU only when there is
adequate ventilation.
-9-