Panasonic AW-E860 Operating Instructions Manual page 37

5600K: The white balance is adjusted to 5600K
illumination.
Note
Neither 3200K nor 5600K can be set from the RCU
(RCB) or the hybrid control panel.
ATW Speed Setting
[ATW Speed: Slow 2, Slow 1, Mid, Fast 1, Fast 2]
ATW Speed can be set.
3 G/L, Color Bar Set Display
Horizontal Phase Adjustment [H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock signal
is supplied.
Subcarrier Phase Coarse Adjustment
[SC Coarse: 1, 2, 3, 4]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
Subcarrier Phase Fine Adjustment
[SC Fine: –511 to +511]
Fine adjustment of subcarrier phase can be made when a
genlock signal is supplied.
Color Bar Setup Setting
[Color Bar Set: 0.0 IRE, 7.5 IRE]
The setup level of color bar can be adjusted.
Color Bar Setup Setting for the optional cards
[Color Bar Set2: 0.0 IRE, 7.5 IRE]
This menu is displayed when the optional card to process
video signals is inserted.
The setup level of color bar to output to the optional card
can be adjusted.
Set 0.0 IRE when the SDI card is inserted.
-37-