Panasonic AJ-LT95 Operating Instructions Manual page 37

Setup menus
EDIT menu
Item
Superimposed
No.
display
311 AUD EDIT IN
312 AUD EDIT OUT
313 AUTO ENTRY
315 AFTER CUE-UP
317 AUD MEM MODE
318 AUD MEM CH
325 POSTROLL TM
The underlining indicates the factory setting.
Setting
Superimposed
No.
display
This selects how to join audio edit IN points.
0000 CUT 0: Cut editing
0001 FADE 1: Fade editing
This selects how to join audio edit OUT points.
0000 CUT 0: Cut editing
0001 FADE 1: Fade editing
This selects whether a previous edit OUT point is to be registered
automatically in the setting as the next edit IN point after
automatic editing.
0000 OFF 0: No automatic setting
0001 REC1 1: Automatic setting for VTR2 only
0002 REC2 2: Automatic setting for VTR2 only (with compensation of –12
frames)
0003 ALL 3: Automatic setting for VTR1 and VTR2
This selects the unit's mode to be established upon completion of
the cue-up operation.
0000 STOP 0: The unit is set to the stop mode.
0001 STILL 1: The unit is set to the still-picture (SHTL + 0.0, JOG STILL)
mode.
This selects whether voice-over editing or audio cross-channel
editing is to be performed using the internal audio memory.
0000 OFF 0: No voice-over editing or audio cross-channel editing is
performed.
0001 INT_X 1: Audio cross-channel editing is performed.
0002 INT_VO 2: Voice-over editing is performed.
This selects the channel for which the voice-over editing or audio
cross-channel editing is to be performed.
0000 CH1 0: Editing in channel 1
0001 CH2 1: Editing in channel 2
0002 CH3 2: Editing in channel 3
0003 CH4 3: Editing in channel 4
0000 0.5s This selects the postroll time (in 1-second increments).
0001 1s
0002 2s
0003 3s
37
Description of setting
V V
T T
R R
1 2
[
[
[
[
[
[
[