Table of Contents
Advertisement
;
C.Fn-21:
You can change the flash light distribution (flash coverage) of the Speedlite
in relation to the shooting angle of view when the flash coverage is set to
<L> (automatic).
0:
(Standard)
j
The optimum flash coverage for the shooting angle of view is set
automatically.
1:
(Guide number priority)
k
Although the periphery of the picture is slightly darker than the 0
setting, this is convenient when you want to give priority to the flash
output. The flash coverage is set automatically to a slightly more
telephoto position than the actual shooting angle of view. The display
changes to < k >.
2:
(Even coverage)
l
Although the effective flash shooting distance becomes slightly shorter
than the 0 setting, this is convenient when you want to minimize light
fall off at the periphery of the picture. The flash coverage is set
automatically to a slightly wider position than the actual shooting angle
of view. The display changes to < l >.
<
C.Fn-22:
When a button or dial is operated, the LCD panel illuminates. You can
change this illumination setting.
0: 12sec (On for 12 sec.)
1: OFF (Disable panel illumination)
2: ON (Illumination always on)
?
C.Fn-23:
When the receiver unit is fully charged during wireless flash shooting, the
AF-assist beam emitter of the receiver unit blinks. You can disable this
operation. Set this function on each receiver unit.
0:
(AF-assist beam, Q lamp)
=
1:
(Q lamp)
>
(Light distribution)
(LCD panel illumination)
(Receiver flash charge check)
C: Setting Custom Functions
85
Advertisement
Table of Contents
