5: Wireless Multiple Flash Shooting with Flash Ratio
Autoflash Shooting with Two Receiver Groups
A
Firing groups
Firing group control
You can divide the receiver units into two
firing groups, A and B, and adjust the
lighting balance (flash ratio) for shooting.
The exposure is controlled automatically
so that the total flash output of firing
groups A and B results in the standard
B
exposure.
Set the firing group of the
1
receiver units.
Operate and set the receiver units one
by one.
Press <8>.
Turn <9> to select the firing group
symbol, then press <8>.
Turn <9> to select <a> or <b>,
then press <8>.
Set one unit to <a>, and the other
unit to <b>.
Set the sender unit to <5>.
2
The procedures in steps 2 to 3 are to
be set on the sender unit.
Press <8>.
Turn <9> to select the firing group
control symbol, then press <8>.
Turn <9> to select <U>, then
press <8>.
59