4
Option Components
◆
Analog Monitor AO-A3 Option
Figure 1
E
D
AO-A3
C
A – Connector (CN5)
B – Installation hole
C – Model number
<1> The ground wires provided in the option shipping package must be connected during installation.
<2> NOTICE: Do not adjust the potentiometers on the option. The potentiometers are factory set and may change the
voltage output characteristics and cause output signal inaccuracy if misadjusted.
◆
Terminal Block TB1
Refer to
Table 4
on page
YASKAWA ELECTRIC TOBP C730600 40E 1000-Series Option AO-A3 Installation Manual
F
D – Ground terminal and installation hole
E – Terminal Block TB1
F – Potentiometers
Figure 1 Analog Monitor AO-A3 Option Components
V1 AC V2 AC
19
for details on TB1 terminal functions and signal levels.
4 Option Components
B
Underside
<2>
FE
AO
A
AO
<1>
9