Lenovo ThinkSystem SR630 V3 System Configuration Manual page 49

External diagnostics handset
The external LCD diagnostics handset is an external device that is connected to the server with a cable, and
it allows quick access to system information such as errors, system status, firmware, network, and health
information.
Note: The external diagnostics handset is an optional part that needs to be purchased separately.
Location of the external diagnostics handset
Location
The external diagnostics handset is connected to the
server with an external cable.
Note: When unplugging the external handset, see the following instructions:
Press the plastic clip on the plug forward.
Hold the clip and remove the cable from the connector.
Callouts
External diagnostics handset
1
Magnetic bottom
2
With this component, the diagnostic handset can be
attached to the top or side of the rack with hands spared
for service tasks.
External diagnostics connector
3
This connector is located on the front of the server, and is
used to connect an external diagnostics handset.
Chapter 2
.
Server components
41